The Members Forum

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Build an XP SP3 Recovery Disc


Administrator / Manager

Status: Offline
Posts: 2410
Date:
Build an XP SP3 Recovery Disc
Permalink   


Save time on an XP clean installation.
Build an XP SP3 Recovery Disc



__________________

Vindicated th_Worm.gif



Manager

Status: Offline
Posts: 1130
Date:
Permalink   

Here's a freeware utility that will do a similar merging of files.
(It has gotten me outta jams...when everything else failed)

Alan


__________________

Where's the money, Lebowski?toilet gif



Administrator / Manager

Status: Offline
Posts: 2410
Date:
Permalink   

Thanks Alan!!



__________________

Vindicated th_Worm.gif



Manager

Status: Offline
Posts: 1130
Date:
Permalink   

Where it got me outta that jam!

Alan


__________________

Where's the money, Lebowski?toilet gif



Administrator / Manager

Status: Offline
Posts: 2410
Date:
Permalink   

Copied & Pasted this to print-out as a reference for use while building the recovery disc.
Build an XP SP3 Recovery Disc



07.14.08



Think you can use your original Windows XP disc to restore your PC? Think again.



by David A. Karp



Odds are your computer came with a recovery disc, a CD with all the programs and drivers that were installed on your PC's hard drive when it was new. And odds are you have absolutely no idea where that disc is.



The good news is that it probably doesn't matter. First of all, the recovery media most PC manufacturers provide is designed for a singular purpose: to restore your computer to the state it was in when you bought it. This process typically involves wiping your hard drive (say bye-bye to your spreadsheets and vacation photos) and then reinstalling Windows and the handful of programs originally included with your system. Unless you're simply preparing the whole kit and caboodle to sell on eBay, this is probably not something you will ever need.



Second, the hardware drivers on your recovery CD are almost certainly out of date, either made obsolete by newer and better versions available online, or simply irrelevant to new hardware you've subsequently installed.



Instead of fretting about the old recovery CD you lost (or perhaps never got), why not take a few minutes and make one of your own?



Ideally, a recovery disc should act as a safety net should anything disagreeable happen to your PC's hard drive or its data. (Think crash, virus, spyware attack, driver corruption, and so on.) A good recovery disc allows you to reinstall Windows to fix a minor problem or rebuild your PC from scratch to recover from a major one.



Here's the problem: Once you upgrade your XP installation to Service Pack 3, Windows won't ever allow you to install an older version (including earlier editions of XP) without either wiping the hard drive clean or installing to a different drive. Even if you do install "fresh," you'll still have to then endure a separate SP3 upgrade. The solution is to create a new hybrid installation disc from whatever installer CD you have and a special version of SP3, using a process known as slipstreaming (etymology: fluid mechanics, or the "Hope and Fear" episode of Star Trek: Voyager.)



Step 1: Take Stock



To prepare a recovery CD, you'll need only three things: a Windows XP install CD (any edition), a valid Windows product key, and about 1.5 gigabytes of free space on your hard drive. Of course, as with many recipes, procuring the ingredients is often the hardest part.



The install CD can be any version, including Service Pack 2, Service Pack 1, or the original release from 2001. If you already have a disc labeled "Windows XP with Service Pack 3" (as opposed to merely an SP3 update disc), then you don't need this procedure. Go ahead and read another story.



The CD can be difficult to come by if you bought your PC with Windows preinstalled, mostly because so many manufacturers omit Microsoft's installer CD these days in favor of some sort of customized "express install" recovery disc. (This is done for a variety of reasons, including to simplify customer support and also, in the penny-pinching tradition, to reduce Microsoft licensing fees.) Some PC manufacturers are service-conscious enough to send a true XP CD to any customer who asks for one, but if you're not so lucky, you can get a genuine disc on eBay for as little as $10.



The 25-digit key, of course, you should already have handy if you own a legal license to the software. If XP came with your PC, it's printed on a sticker somewhere on the PC case; if you bought XP, it's on a sticker on the CD sleeve. (You may also have been compulsive enough to save the hologram-laden Certificate of Authenticity, which should have the key as well.) If you can't find it, contact your PC's manufacturer or, barring that, Microsoft for a proper key. You might also try the simply awesome (and awesomely named), open-source Magical Jelly Bean Key Finder, a tiny little utility whose sole purpose is to find the registration keys hidden away in your Registry.



Step 2: Slipstream Service Pack 3



To create a slipstreamed XP SP3 CD, first create a new folder called XP in the root folder of your hard drive. Insert your original XP CD, start Windows Explorer, and then navigate to your CD drive. Highlight everything in the root folder of the CD, and copy all of it to the C:\XP folder you just created.



Next, create a second new folder alongside C:\XP, and name it SP3. Go to download.microsoft.com, type sp3 network install into the search box, and click the link for Windows XP Service Pack 3 Installation Package for IT Professionals and Developers in the search results. Download the 324MB file, WindowsXP-KB936929-SP3-x86-ENU.exe, and save it to the new C:\SP3 folder.



From the Start menu, select Run (or press Windows key-R). Type the following command at the prompt and click OK:



c:\sp3\WindowsXP-KB936929-SP3-x86-ENU /integrate:c:\xp



Type the entire command on one line with only a single space between ENU and /integrate—there should be no spaces surrounding the colons.



If all goes well, the process should take a minute or two and then conclude with a simple "Completed" message box. Otherwise, if you see an error, here's what it means:



Failed to copy some or all of the files necessary for integrated install: This can happen for any number of reasons, most likely because you mistyped the /integrate command. But do make sure you have plenty of free hard drive space, and that all of the files from your older XP CD are present in the C:\XP folder.



…is not recognized as an internal or external command: Either you mistyped the SP3 update filename, or you didn't save it in the C:\SP3 folder.



…is not a valid Win32 application: This error usually means the file you downloaded is corrupt, or has not finished downloading. Delete the file and try downloading again.



…not the correct version: You're trying to slipstream the U.S. English version of the SP3 update with a non-English copy of Windows XP, or vice versa. Just return to the Microsoft download page, choose your language from the Change language list, and download the correct file.



Step 3: Automate the Install



Now if you want to be really slick, you can set up what Microsoft calls an answer file to enter your product key automatically so you don't have to type it manually later on. On your original Win XP CD (Professional Edition only), navigate to the \Support\Tools folder, double-click DEPLOY.CAB, and then double-click Setupmgr.exe to open the Windows Setup Manager Wizard. When prompted, choose Create a new answer file and then Windows Unattended Installation. For the User Interaction Level, choose Provide defaults, and when asked about the Distribution Folder, answer No. Finally, you'll see a new window, into which you can specify defaults; select Providing the Product Key on the left and then type your product key in the text fields on the right.



When you're done, save the file Unattend.txt into your C:\XP folder. For additional information, open the Setupmgr.chm file, also found in DEPLOY.CAB.



Step 4: Bootstrap and Burn



You're not done with your old XP disc yet; you still need to pull the boot loader off the old disc so you can make the new one bootable.



The easiest way to do this is using ImgBurn, available free from www.imgburn.com. Install ImgBurn, start the app, and click Write files/folders to disc on the first screen. Choose the Advanced tab, followed by the Bootable Disc tab, and from the Extract Boot Image list select the drive containing your XP disc. Click the Save icon and save the BootImage.ima file to your C:\SP3 folder.



Now it's time to burn a new CD. You'll need CD-burning software capable of creating a bootable CD, such as ImgBurn, Nero Burning ROM (part of Nero 8 Ultra Edition), or Roxio Media Creator, and you'll need to customize the burning settings carefully.



If you're using Roxio or Nero, choose Bootable CD or CD-ROM (Boot), respectively, from the list of project types. Or, if you're using ImgBurn, choose the Advanced tab, followed by the Bootable Disc tab, and turn on the Make Image Bootable option.



Next, use 0x7C0 for the load segment, and 4 for the sector count. Make sure you're using the Joliet file system, and if prompted to choose a bootable disc emulation type, select no emulation. Specify the BootImage.ima file you just created as the boot image; copy the CD volume label from your original XP CD, and paste it as the disc label for your new project.

Drag the entire contents of the C:\XP folder into your CD project and burn the CD. For good measure, use a Sharpie pen to write your XP key right on your CD, and then put the disc in a safe place for that rainy day.

__________________

Vindicated th_Worm.gif



Administrator / Manager

Status: Offline
Posts: 2410
Date:
Permalink   

Couldn't get the above procedure to work so I used this one.
How to Slipstream Windows XP Service Pack 3 to Create an Integrated XP Setup Disk with SP 3



__________________

Vindicated th_Worm.gif

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard